Publicité
GB
Part
Backrest
Frame
Inner shell
Seat
Frame
Body
Structural parts
Mechanism
Cover
Base
Armrest (plastic)
Armrest (aluminum)
Inner mesh
Covering material
Plain, mix
Cloth
Herringbone
Cushion material
Seat
> XX < indicates the materials of the parts. This information is useful for recycling.
Please understand that product specifications might change without prior notification due to improvements made
to the product.
23
Materials
Materials
Glass-reinforced polyamide >PA-GF<
Polypropylene >PP<
Glass-reinforced polyamide >PA-GF<
Metal (aluminum) >ADC<
Polypropylene >PP<
Metal (aluminum) >ADC<
Glass-reinforced polyamide >PA-GF<
Metal (aluminum) >ADC<
Polyester
Polyester
Acrylic
Polyurethane >PUR<
GB
Troubleshooting
Problem
Check
Are you sitting on the seat
when adjusting the seat
height?
The seat cannot be lifted up.
Is the seat height in its
highest position?
Are you sitting on the front
edge of the seat?
The seat cannot be lowered.
Is the seat height in the
lowest position?
Is the smart slide operation
lever on the bottom right of
the seat set to the [LOCK]
position?
The backrest does not
recline.
Is the smart slide operation
lever on the bottom right
of the seat set to the [+]
position?
Casters do not move
Are they tangled with lint or
smoothly.
wool?
Are you using hard casters
Casters are slippery.
on hard surface floors such
as a plastic tile floor?
Chair makes noise.
-
Please contact an official dealer.
Solution
Page
Adjust the seat height while
14
not seated on the seat.
The seat cannot be lifted up
14
beyond the highest position.
Sit in the center of the seat
14
while adjusting.
The seat cannot be lowered
14
beyond the lowest position.
Set the smart slide operation
15, 16
lever to [+] or [-].
Set the smart slide operation
15, 16
lever to [-].
Remove lint or wool or
replace the casters.
Use soft casters for hard
floors.
Visit a retail shop or the
nearest branch.
24
Publicité
