Siemens SITRANS LR560 Manuel De Demarrage Rapide page 6

Power
Nominal 24 V DC with
max. 550 Ohm loop resistance
• Maximum 30 V DC
• 4 to 20 mA loop power
Approvals
Notes:
• The device label lists the approvals that apply to your device.
• Use appropriate conduit seals to maintain IP or NEMA rating.
• General CSA
• Radio R&TTE (Europe), FCC, Industry Canada,
• Hazardous
Non-sparking/
Energy Limited
Dust Ignition Proof
Dust Ignition Proof
Non-incendive
Pressure Application
WARNINGS:
• Do not attempt to loosen, remove, or disassemble process connection or instru-
ment housing while vessel contents are under pressure.
• Improper installation may result in loss of process pressure.
1)
Check the device label for the characteristics of the device, and confirm the loop load.
2)
Non-Sparking/Energy Limited wiring (Europe) and Dust Ignition Proof wiring (Europe/Inter-
See also
national)
on page 16.
3)
Non-Sparking/Energy Limited wiring (Europe) and Dust Ignition Proof wiring (Europe/Inter-
See also
national)
on page 16.
4)
Non-incendive and Dust Ignition Proof wiring (US/Canada)
See also
Page EN-4 SITRANS LR560 (HART) – QUICK START MANUAL
1)
.
1)
, FM, CE, C-TICK
US/C
2)
(Europe)
3)
(Europe/International)
4)
(US/Canada)
2)
(US/Canada)
For other configurations, see the chart under
Loop Power
on page 16.
ATEX II 3G Ex nA/nL IIC T4 Gc
ATEX II 1D, 1/2D, 2D
IECEx SIR 09.0149X
Ex ta IIIC T139
FM/CSA:
Class II, Div. 1, Groups E, F, G
Class III T4
FM/CSA Class I, Div. 2,
Groups A, B, C, D, T4
on page 17.
o
C Da
7ML19985XF81