Siemens SITRANS LR560 Manuel De Demarrage Rapide page 16

Quick Start Wizard via SIMATIC PDM
Notes:
• The Quick Start wizard settings are inter-related and changes apply only after you click on
FINISH AND DOWNLOAD at the end of the last step, to save settings offline and transfer
them to the device.
• Click BACK to return and revise a setting or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu Device – Wizard - Quick Start, and follow steps 1 to 4.
Operating via FDT (Field Device Tool)
FDT is a standard used in several software packages designed to commission and maintain
field devices. Two commercially available FDTs are PACTware and Fieldcare.
To configure a field device via FDT you need the DTM (Device Type Manager) for the device.
Siemens instruments use SITRANS DTM and an instrument EDD written for SITRANS DTM.
1) First install SITRANS DTM on your system. You can download it from:
http://support.automation.siemens.com. Click on Product Support, and navigate to Product
Information/Automation Technology/Sensor systems/Process Instrumentation/Software &
Communications.
2) Install the SITRANS LR560 HART EDD for SITRANS DTM. You can download it from the
product page of our website at: www.siemens.com/LR560. Go to Support > Software
Downloads.
Configuring a new device via FDT
An Application Guide can be downloaded from the product page of our website under Support.
Operating via AMS Device Manager
AMS Device Manager is a software package designed to commission and maintain field devices.
Please consult the operating instructions or online help for details on using AMS Device
Manager. You can find more information at: http://www.emersonprocess.com/AMS/.
Electronic Device Description (EDD)
SITRANS LR560 requires the EDD for AMS Device Manager version 9.0.
Page EN-14 SITRANS LR560 (HART) – QUICK START MANUAL
Quick
Start
7ML19985XF81