Explanation Of Functions - Becker Centronic MemoControl MC411-III Notice De Montage Et D'utilisation

Explanation of functions

Channel
A channel of the transmitter can be programmed into one or more receivers of
a radio control system. One receiver is operated through an individual com-
mand, several receivers through a group command.
Transmission pilot light
A radio signal is indicated by the transmission pilot light lighting up. The trans-
mission pilot light flashes while transmitting if the battery is getting weak. The
transmission output and range decrease as the battery power declines. If the
transmission pilot light no longer lights up when a button is pressed, the bat-
tery must be replaced.
Function selection button
Each Centronic radio receiver for roller shutter and blind installations can save
switching times for one UP and one DOWN movement.
In the " " operating mode, this movement is repeated every 24 hours.
The operating mode is irrelevant when programming the switching time. Any
stored switching times are overwritten.
Briefly press the function selection button to display the current operating
mode / and press it for longer to change the mode.
26 - en