Explanation Of Functions - Becker Centronic EasyControl EC241-II Mode D'emploi

1. Control button with pulse sequence UP-STOP-DOWN-STOP
2. Channel indicator lamp
3. Programming button
4. Type plate
Channel
The channel of a transmitter can be programmed into one or more receivers. One re-
ceiver is operated through an individual command, several receivers through a group
command.
Channel indicator lamp
A radio signal is indicated by the channel indicator lamp lighting up. When the battery
starts to lose power, the channel indicator lamp flashes when transmitting. The trans-
mission strength and the radio range decrease as battery power declines. If the chan-
nel indicator lamp no longer lights up when a button is pressed, the battery must be
replaced.

Explanation of functions

23 - en