The One-Touch Free-Style Grip Belt; Using The Lcd Monitor - Panasonic PV-GS250 Mode D'emploi

The one-touch free-style grip belt

ª
To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this Camcorder more easily.
1
Open the lock cover 1 by pinching the
projections 2 on both sides. Press the lock
button 3 to remove the grip belt.
2
1
≥When removing the grip belt, tightly hold the
Camcorder with both hands.
≥After removing the grip belt, restore the lock
cover to the original position.
2
Adjust the belt length.
1 Flip the belt.
2 Slide 1 in the direction indicated by the arrow.
3 Fix the belt.
3
Put your hand through the strap.
≥Use the Magic Wire Remote Control with
Narration Mic for more convenience.
≥Hold the Camcorder without covering the
microphones or the sensors with your hands.
ª
To restore the strap to the grip belt
≥When returning the grip belt to the grip belt
attachment, press the lock cover 1 and check if
the grip belt is securely locked.
Before using
3
1
2
1 3
1
ª
To use as a grip belt
Adjust the belt length so it fits your hand.
1
Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.

Using the LCD monitor

You can record the image while viewing it on the
LCD monitor.
1
Put a finger on the LCD monitor release and
pull the LCD monitor out in the direction of
the arrow.
≥The viewfinder is now deactivated.
≥It can open up to 90o.
2
Adjust the angle of the LCD monitor
according to your preference.
1 180o
≥It can rotate up to 180o 1 towards the lens or
90o 2 towards the viewfinder.
≥The brightness and color level of the LCD
monitor can be adjusted from the menu.
≥If it is forcibly opened or rotated, the Camcorder
may be damaged or fail.
≥Check that the card slot cover is closed.
≥When the LCD monitor is rotated by 180o
towards the lens (when recording yourself), the
LCD monitor and the viewfinder will be
simultaneously activated.
2
1 3
2 90o
15
LSQT0862