Johnson LIVESTRONG LS10.0E Manuel Du Propriétaire page 19

ASSEMBLY STEP 9
If you would like to use the elliptical without the UPPER
HANDLEBARS, you can install the HANDLEBAR CAPS
instead of the UPPER HANDLEBARS.
NOTE: All hardware for this step is included in the plastic
bag with the HANDLEBAR CAPS.
A If the UPPER HANDLEBARS are already installed,
SCREW
remove the PRE-INSTALLED SCREWS and slide
off the UPPER HANDLEBARS and HANDLEBAR
HANDLEBAR CAP
COVERS from the LOWER HANDLEBARS.
LOWER HANDLEBAR
B Remove 2 HANDLEBAR CAPS and SCREWS from
plastic bag.
C Place HANDLEBAR CAPS over the LOWER
HANDLEBARS and attach using 2 included SCREWS.
19