Johnson LIVESTRONG LS10.0E Manuel Du Propriétaire page 14

ASSEMBLY STEP 4
PEDAL ARM BRACKET
FLAT WASHER (P)
SPRING WASHER (O)
BOLT (N)
14
FLAT
WASHER (L)
27 mm
Qty: 4
Open HARDWARE FOR STEP 4.
A
Slide 1 FLAT WASHER (L), 1 WAVY
B
WASHER (M) and another FLAT WASHER
(L) onto the LOWER LINK ARM.
FLAT WASHERS (L)
Slide the LOWER LINK ARM into the
C
WAVY WASHER (M)
LOWER LINK ARM
PEDAL ARM BRACKET.
Attach the LOWER LINK ARM to the
D
PEDAL ARM BRACKET using 1 FLAT
WASHER (P), 1 SPRING WASHER (O)
and 1 BOLT (N).
Repeat steps B–D on the opposite side of
E
the elliptical.
HARDWARE FOR STEP 4:
WAVY
WASHER (M)
29 mm
Qty: 2
SPRING FLAT
WASHER (O) WASHER (P)
15.4 mm 20 mm
Qty: 2 Qty: 2
BOLT (N)
20 mm
Qty: 2