Operating And Control Elements; Switching The Appliance On And Off; Setting The Temperature - Electrolux EK260BR Notice D'utilisation

Operating and control elements

The electronic control panel features the "touch capacitance technology".
Any function can be activated by touching the corresponding icon.
Temperature display (refrigerator compartment)
1
Temperature setting buttons (refrigerator compartment)
2
On/Off button (refrigerator compartment)
3
Action Cool button (the Action Cool button switches the
4
refrigerator compartment to maximum cooling)
Fan button
5
Temperature display (freezer compartment)
6
Temperature setting buttons (freezer compartment)
7
ActionFreeze button
8
Mute alarm (refrigerator and freezer)
9
On/Off button (refrigerator and freezer)
bl

Switching the appliance on and off

Switching the appliance on
Press the On/Off button .
bl
The refrigerator temperature display shows the current interior
temperature.
The freezer temperature display shows two dashes.
The current temperature value in the freezer is only displayed
once the interior temperature reaches 0°C.
Note
The refrigerator can be switched off (freezer remains switched on).
Switching the refrigerator compartment off
Press the On/Off button
3
Switching the appliance off
Press the On/Off button
bl
for approx. 3 seconds.
for approx. 3 seconds.
Symbols in the display
Setup mode is activated (activating the child lock)
Child lock is activated
ActionCool on symbol
Fan ON symbol
Demo mode is activated
Alarm (symbol flashes if the temperature inside the appli-
ance is too high)
Power failure symbol
ActionFreeze is on

Setting the temperature

The temperature of the refrigerator and freezer compartment can
be set separately.
Setting the refrigerator temperature
Press buttons .
2
Setting the freezer temperature
Press buttons .
7
- When pressing one of the buttons for the first time, the display
will start to flash.
- Pressing this button again enables you to change the tempera-
ture setting.
Use button to reduce the temperature = colder.
Use button to increase the temperature = warmer.
- The electronic control system will switch over automatically
about 5 seconds after the last time you pressed the button, and
the actual temperature will be displayed.
If F0 to F9 appears in the display, the appliance has a fault. In this
case, contact the customer service department.
GB
53