Equipment; Interior Light - Electrolux EK260BR Notice D'utilisation

Equipment

You can re-arrange the storage
shelves as required.
Lift the glass shelf, align the recess
over the support and replace the
shelf in a higher or lower position.
Sectioned shelf
If you need to make space for
tall containers, simply slide
the front half of the sectioned
glass shelf carefully under-
neath the back half.
Adjusting the insertion
height of the sectioned
shelf
Remove the supporting strips
and place on the supports
above or below the previous
position.
Removing the drawer
Pull the drawer out as far as it will
go, lift slightly at the back and
remove.
Inserting the drawer
Extend the pull-out rails as far as
they will go.
Place the drawer on the rails and
slide it right in.
Bottle grid
Repositioning the door racks
Lift door rack vertically, lift out to the front and
re-insert at a different height, following these
steps in the reverse order.

Interior light

The interior light will always switch on when one of the appliance
doors is opened.
The light intensity of the LED light cor-
responds to laser class 1/1M.
Important
The light cover may only be removed by
customer service staff.
If the cover is removed, do not look di-
rectly at the light through optical lenses
from close distance. This can damage
your eyes.
GB
55