Siemens Cemat Minerals V9.1 Mode D'emploi page 18

Type
Type of the module algorithm access to the parameter; a differentiation is made between inputs,
non-isolated inputs and outputs (refer to table).
Parameter Types:
Abbreviation
I
O
IO
Attr. (Attribute)
Additional characteristics of the parameter when used in CFC. Non-connected input and input-
output parameters can be parameterized (only input-output parameters for online FCs). Output
parameters cannot be parameterized and can be transferred in the CFC by connecting to an
input of the same data type. Additional or deviating properties of the parameter are specified as
follows:
Attributes of the parameters:
Abbreviation
B
E
M
Q
U
HMI
The parameters marked with "+" can be changed and monitored from the associated OS
module.
Permitted values
Additional limitation within the data type value range.
CEMAT MinAS, General (V9.1), PS001
Function Manual, 11/2020, A5E50300996-AA
Reference Manual Objects
Type
Input. Value supplied to the module (display in the CFC: left-hand
parameter list)
Output. Output value (display in the CFC: right-hand parameter list)
Input/Output. Non-isolated input, which can be written from the OS and
rewritten from the module (display in the CFC: left-hand parameter list)
Attribute
Can be operated (only using the OS). An OS can make write access to the
element. It is implicitly not visible in the CFC.
Transferred to the OS when changed
MESSAGE ID not parameterizable for annunciation module (e.g. ALARM
8P). ID specified from the annunciation server.
Connectable. The element can be connected with another output of the
same type.
Not visible in the CFC. Because the element is supplied by the CFC or the
OS, it is not displayed in the CFC (e.g. message ID). It is a default value
that can be changed in the CFC.
General
11