Introduction To The Module Description (As); Type/Number; Calling Obs; Function - Siemens Cemat Minerals V9.1 Mode D'emploi

General

Introduction to the Module Description (AS)

The module descriptions always have same form. This helps you to find the required information
quickly when you read the description of the individual module.
Here is a description of the sections:

Type/number

The listed blocks have to be called if you want to use the object. The Blocks are listed with
name and number.
Module name:
Module no.:

Calling OBs

This provides details of the organizational blocks (OBs) in which the described block must be
installed.
In contrast to the general PCS 7 libraries the CEMAT library has some specialties. Most of the
CEMAT blocks must be called exclusively in the OB1 task. The detailed information you find in
the object descriptions.
When you install the modules in the CFC they are automatically called after the most recently
installed module. If necessary, you must change the processing sequence with the run-time
editor. The CFC creates the necessary OBs during the compilation.

Function

This contains a summary of the function of the module. The section operating principle contains
further information for complex modules.

Operating principle

This contains more detailed information on the function of individual inputs, operating modes,
time processes, etc. You should understand the interrelationships described here in order to use
the module effectively.
8
Reference Manual Objects
Unique name of the S7 Block, e. g. C_DRV_1D.
For the CEMAT Objects this corresponds to the name of the object type.
Unique number of the function block (FB) or function (FC).
CEMAT MinAS, General (V9.1), PS001
Function Manual, 11/2020, A5E50300996-AA