Explanations To The Table Module Data - Siemens Cemat Minerals V9.1 Mode D'emploi

Explanations to the Table Module Data

Number of functions per AS
The system functions are called only once.
Runtime in ms
The time that the CPU needs to process the associated module program in the normal situation
(e.g. in the case of a driver, the processing time of the watch-dog timer organizational block
(OB), without producing an annunciation for a channel error).
The following table contains the runtimes in a S7 410-5HX08-0AB0. The runtimes for other
CPUs depend on their performance.
Work Memory
Memory requirement of the program code, once per module type.
Instance DB work memory
Memory requirements of an instance DB
Temporary memory
The local data storage required in a processing level for an invocation of the module. This is
limited for a specific CPU, and causes a CPU stop should it be exceeded. You must check this
in the CPU configuration and, if necessary, redistribute to the processing levels (OBs) in
accordance with the actual requirement.
Multi-instance module
The technological module uses the specified modules and must be contained in the AP
(application program). They are stored in the same library.
CEMAT MinAS, General (V9.1), PS001
Function Manual, 11/2020, A5E50300996-AA
Reference Manual Objects General
7