Technical Data - Dometic BUTTNER MT PL 300 SI Instructions De Montage Et De Service

➤ If the product contains any non-replace-
able batteries, rechargeable batteries or
light sources, you don't have to remove
them before disposal.
➤ If you wish to finally dispose of the prod-
uct, ask your local recycling center or spe-
cialist dealer for details about how to do
this in accordance with the applicable dis-
posal regulations.
➤ The product can be disposed free of
charge.

Technical Data

Input nominal voltage
Input voltage range
Output nominal voltage
Output nominal power
Overload/1 second
Idle current
Nominal power max. cur-
rent
Efficiency
Weight approximately
Dimensions (L x W x H), in
mm
Battery cables
Fusing included in battery
cable
Cooling
Protection
Remote control input
Protection class/IP rating
Certification
16
MT PL 300 SI
300 W
500 W
0.4 A
30 A
1500 g
220 × 165 × 80 240 × 165 × 80
2
6 mm
30 A
Overload, overheating, output short-circuit, over-voltage, low voltage
4445103623
Recycling packaging material
➤ Place the packaging material in the appro-
priate recycling waste bins wherever pos-
sible.
MT PL 600 SI MT PL 1500 SI
12 V g
10.5 - 15 V g
230 V w/ 50 Hz / TDH < 3%
600 W
1000 W
0.7 A
60 A
87 - 94%
2000 g
380 × 175 × 100
2
10 mm
60 A
Temperature and load depending
12 V g / 30 mA
Class I / IP20
MT PL 2000 SI
1500 W
2600 W
0.8 A - 1.0 A
150 A
3800 g
254 × 463 × 118
2
35 mm
175 A
2000 W
4000 W
0.8 A - 1.0 A
200 A
6300 g
2
50 mm
225 A