LENCO DAR-050 Mode D'emploi page 8

4. Press Skip down
for storage.
5. Press "Stop/Enter" button (4) to confirm the setting.
6. Repeat step 2 to 5 to store other stations.
Recall preset stations
1. Set to FM/DAB mode
2. Press Pre-up or Pre-down button (on remote control) to enable memory recall state.
3. Press Skip down
4. Press "Stop/Enter" button (4) again to confirm the recall station.
DAB/FM reset:
If case would like to erase all the FM/DAB programed memory station, operation as below.
1. Set in DAB or FM mode, press "Menu/Mem/clk-adj" button (16) to enter the "Menu", then
press Skip down
2. Press "Stop/Enter" button (4) to enter the "System" setting, then press Skip down
(13) button to select "Factory reset". Then press "Stop/Enter" button (4) to
or Skip up
enter factory reset mode, press Skip down
then press "Stop/Enter" button (4) confirm the factory reset.
3. Apparatus will switch to DAB mode auto scan once and erase all the programed memory
station, perform the preset station again as above.
Playing CD/MP3 disc
 Getting start
1. Press Function button (7) to select CD mode.
2. Open the CD door by pressing the Open/close button (6). Put a CD disc into the compartment
and close the CD door.
3. Focus search is performance if disc is inside. Total number of tracks is read.
 Play/pause mode
1. If Play/Pause
2. If Play/Pause
"pause" will appear at the LCD display (1). Press again to resume normal playback.
 Stop mode
1. If Stop button (10) is pressed during play or pause mode. Go to stop mode and display
total number of track on the LCD display (1).
 Skip mode (skip up
1. During play or pause mode, if skip up
keep in play or pause mode.
2. During play or pause mode, if Skip down
previous track and keep in play or pause mode.
 For MP3 disc/file
1. Place the MP3-CD to CD compartment. After focus search is performing, the total number of
track will be shown on the LCD display (2).
2. Press Skip up
3. When the desired track and album is being selected, press the "Play/Pause
start playback.
(12) or Skip up
(12) or Skip up
(12) or Skip up
button (3) is pressed during stop mode, the first track will be played.
button (3) is pressed during playback, system go to pause mode and the
/skip down
or Skip down (12/13) button to select the track number.
(13) button to select the desired station memory
(13) button to select the desired recall station.
(13) button to select "System".
(12) or Skip up
)
button (13) is pressed it will go to next track and
button (12) is pressed, it will go back to
8
(12)
(13) button to select "Y",
" button (3) to