Icons Chart; Getting Started - Fagor LUX 360 Manuel D'utilisation

Icons Chart

The icon appears when the lid is properly closed
and locked. For any function except Brown and
Sauté, the lid needs to be fully closed. After
Close Lid pressing START/STOP to begin cooking, the
icon disappears. If the lid is off, the unit will beep
and the icon will change from open to close to
let you know to close the lid.
The icon appears when the lid is open or
removed. For the Brown and Sauté functions
the lid needs to be completely off the unit. After
Open Lid
pressing START/STOP to begin cooking, the
icon will disappear. If the lid is closed, the unit
will beep and the icon will change from close to
open to let you know to remove the lid.
The CUSTOM setting is used to program an
individual pressure level/temperature and time
in the functions: Pressure Cook, Slow Cook,
Brown, Sauté and Grains. Select F1, F2 or F3 by
turning the dial and confirm by pressing the dial.
Favorite Menu
Next, select the desired pressure level and time
and press the dial to confirm. Press the START/
STOP button to begin cooking. The unit will
automatically save the settings for the selected
function.
Indicates that the buttons are locked. To unlock
Lock Button
them, press and hold the PANEL LOCK button.
Indicates that the buttons are unlocked. To lock
Unlock Button
them, press and hold the PANEL LOCK button.
After the setting is chosen, the icon blinks to let
you know to press the START/STOP button to
Press Start
begin cooking. Once the cooking process starts,
the icon will disappear.
Keep Warm Indicates that the KEEP WARM function is on.
Indicates that the unit is building pressure or
Preheat
temperature.
8

Getting Started:

Before First Use
Read the safety instructions found in this manual before plugging in and operating the
unit. Before using the multi-cooker for the first time, follow these steps:
1. Remove all packing materials and literature from inside the Fagor LUX 360 Multi-
Cooker. Lift out the removable cooking pot and remove any pieces of paper from
under it. Remove the plastic protection from the control panel and any stickers
from the stainless steel body.
2. Wash all removable parts in warm soapy water. Rinse and dry all parts thoroughly.
Wipe the stainless steel outer housing with a clean damp cloth. NEVER submerge
the stainless steel outer housing in water or any other liquid. Only the removable
cooking pot is dishwasher safe.
3. To clean the pressure regulator knob, gently push the pressure regulator knob
down and turn it counterclockwise past STEAM to the CLEAN setting. Once the
dot on CLEAN is aligned with the dot on the base of the pressure regulator, you
can lift the pressure regulator up and out of the housing. Look through the holes
of the pressure regulator to make sure there is nothing obstructing the pressure
stream, then clean the pressure regulator knob with warm soapy water, allowing
the water to run through the pressure regulator to remove all particles.
4. To put the pressure regulator back into the lid, simply align the CLEAN setting with
the dot on the base, gently push down on the pressure regulator and turn the knob
clockwise until it slides back into place.
5. Make sure the silicone gasket is placed properly inside the lid or else the cooker
will not function properly.
6. After thoroughly drying all parts, place the removable cooking pot back into the
multi-cooker before cooking.
9