I Assembling The Camera - Panasonic WV-CF324 Mode D'emploi

• The AF switch may not adjust the focus
resulting in LED for AF blinking. For the
following subjects, select ELC with the
light control mode selector and adjust
the focus manually.
• Quickly moving subjects
• Subjects with remarkable illuminance
change
• Subjects with low illuminance (e.g.
headlights)
• Subjects with extremely bright or
reflective character
• Subjects behind a window
• Subjects with less contrast between
light and dark (e.g. white walls)
• Subjects with
depth
• Subjects with flickering
• Subjects with laterally parallel lines
(e.g. shutters)
• Foggy or dirty dome cover
r Focus adjustment is available by press-
ing the AF switch with a pointed item
such as a ballpoint pen even after
mounting the dome cover. In such a
case, the direction of the camera and the
presence of the object should be
checked beforehand because visual
check is not available on the monitor.
Notes:
• Before mounting the top cover, make
sure that the subject is present.
• Be aware that zoom adjustment and
coarse focus adjustment shall be per-
formed beforehand to obtain precise
focus.
Press the AF switch with a pointed tool.
extensive greater

I Assembling the Camera

1. Mount the top cover.
Adjust the guide groove of this unit to
install the top cover.
Top cover
Dome cover block
(with smoke
dome cover)
2. Fix the top cover and the camera main
unit by means of three fixing screws
(M3).
Guide groove
15