Setting Procedures; Language Setup (Language Setup); Camera Identification Setting (Camera Id) - Panasonic WV-CW384E Manuel D'utilisation

Setting Procedures

First, select a language for menu display and camera ID display.

Language Setup (LANGUAGE SETUP)

1. Select "LANGUAGE" on the top menu and press the [SET] button.
→ The "LANGUAGE SETUP" menu opens.
2. Select a language. The default setting is "ENGLISH".
Available languages: ENGLISH, FRANÇAIS, ESPAÑOL,
DEUTSCH, ITALIANO, êìëëäàâ, CHINESE or JAPANESE
3. Select "SET" on the menu and press the [SET] button.

1. Camera Identification Setting (CAMERA ID)

Assign a name to the camera using up to 16 characters to display it overlaying on the camera picture in the selected position.
Note:
• If you change the language selection after the assignment of camera ID, it will be erased.
1. On the "CAMERA SETUP" menu, select "ONO" or "OFFO" for
"CAMERA ID" and press the [SET] button.
ONO: Displays entered camera ID.
OFFO: Does not display the ID.
→ The "CAMERA ID" menu opens.
2. Select a character from the character area and press the [SET]
button.
→ The selected characters are displayed in the editing area.
3. Repeat these procedures until all characters are entered.
• To enter a blank space, select "SPACE" and press the [SET]
button.
• To replace a specific character in the editing area:
1. Move the cursor to the editing area and then move the
pointer to the character to be replaced pressing the
[LEFT] and [RIGHT] buttons.
2. Move the cursor to a candidate character in the character
area and press the [SET] button.
• To erase all characters of the camera ID, select "RESET" and
press the [SET] button.
Note:
• For Chinese language, up to 8 characters can be entered.
**LANGUAGE SETUP**
LANGUAGE ENGLISH
SET
RET TOP END
**CAMERA SETUP** 1/2
O
CAMERA ID OFF
O
ALC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
SYNC INT
WHITE BAL ATW1 O
O
MOTION DET MODE1
DNR HIGH
RESOLUTION HIGH
O
BW MODE
CAMERA ID
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE POSI
RET TOP END RESET
················
Character
Cursor
Character
Area
Command
Editing
Area
Pointer
Highlighted
23