Panasonic WV-CW384E Manuel D'utilisation page 18

,
Mount the sunshield
Mount the sunshield on the camera with the 4 sunshield mounting
screws (accessories).
Notes:
• Be sure to use the 4 sunshield mounting screws (accessories). Recommended tightening torque: 0.59 N·m
• The "FRONT" side of the sunshield shall be on the lens side.
.
When the mounting surface is changed to the top surface of the camera body
1. Remove the 4 tripod head fixing
screws from the camera body and
remove the tripod head.
2. Loosen the spacer fixing screw of the
tripod head and remove the spacer.
3. Loosen the fixing screw and remove the rear cover.
4. Position the cable clamp topside to pass the video out-
put cable and power cord upward. And then, mount the
rear cover.
5. Mount the tripod head on the top of the camera body with the 4 tripod head mounting screws that were removed in the
step 1.
Important:
• Caution shall be taken to prevent the video output cable and power cord from being caught between the camera body and
tripod head.
18
Align the arrow
to lens direction.
Tripod head fixing
screw x4
Rear cover
Sunshield mounting screw x4 (M3 x 6) (accessories)
Sunshield
Camera main body
Spacer fixing screw
Spacer
Spacer
Tripod head
Cable clamp
Fixing screw x1
Switch cover