Installation Conditions Dt 600C Fh; Installation Conditions Dt 600C Fh - En 1125 - Häfele DT 600c Instructions D'utilisation

4.4 Installation conditions DT 600c FH

Component
Door panel
Single profile cylinder
Mortice
Lever handle
Mortice locks

4.5 Installation conditions DT 600c FH - EN 1125

Component
Door panel
Single profile cylinder
Mortice
Lever handle
Mortice locks
For further installation requirements and the dimensions of the push bar / bar handle
required for installation, see the installation instructions of the manufacturer BKS. The
current installation instructions for BKS fittings are available for download from the
BKS homepage or are included with the push bar / bar handle.
44
Installation reference
• The product may be installed on fire resistant doors.
• Only single profile cylinders with fire protection approval are
permitted.
• The hole for the single profile cylinder must be closed to prevent
the flames from penetrating.
• The mortice must be present and must comply with the
dimensioned drawing in the installation instructions.

• DT 600c FH .
• The lever handle is firmly mounted on the exterior module of the
fitting.
• The fitting is available as a left-hand or right-hand variant.
• If the lever handle is to be replaced, only lever handles for
emergency exit doors (according to EN 179) may be used.
• Mortice locks for emergency exit door locks in compliance with
EN 179 and EN 1125 – see www.hafele.com.
Installation reference
• The product may be installed on fire resistant doors.
• Only single profile cylinders with fire protection approval are
permitted.
• The hole for the single profile cylinder must be closed to prevent
the flames from penetrating.
• The mortice must be present, and must comply with the
requirements by manufacturer BKS.

• DT 600c FH - EN 1125
• The lever handle is firmly mounted on the exterior module of the
fitting.
• The fitting is available as a left-hand or right-hand variant.
• If the lever handle is to be replaced, only lever handles for
emergency exit doors (according to EN 179) may be used.
• Mortice locks for emergency exit door locks in compliance with
EN 179 and EN 1125 – see www.hafele.com.
.