Password Mode; View Total - Baxtran STA Manuel D'usager

User's Guide
weighing
FUNCTION
The 2nd mode
nation, results in different function.
To access those functions that are not printed on the remote controller, you must additionally press
specified key to access that function.
In 2nd mode, the screen keeps flashing the below message, waiting for user's input of key combina-
tion.

PASSWORD MODE

ACTION
To enter the
FUNCTION
To access advanced settings, password is required.
password
In
sword.
CONDITION
The scale must not be in
El password debe ser correcto. En caso contrario, el mensaje de error
scale automatically returns to
TOTAL
ACTION
To accumulate the weight reading, press
FUNCTION
Current weight reading will be accumulated into scale's
The screen displays the below message, indicating that
CONDITION
The scale must not be in
The scale must be stable. Otherwise, error message
Current weight reading must be greater than 0 (or 0.0 or 0.00, depending on the resolution). Otherwise,
error message
The weight reading on scale must return 0 (or 0.0 or 0.00, depending on the resolution) before next
weight reading can be added. This assures that a load on the scale is only added to the
Otherwise, error message
NOTICE:
The accumulator always uses the displayed weight, so GROSS and NET readings can be
added into the same TOTAL.

VIEW TOTAL

ACTION
To view the
FUNCTION
42
mode.
is designed to make full use of keys on remote controller. Different key pressing combi-
password mode, press
mode, the screen displays the password message, waiting for user's input of correct pas-
HOLD mode. Otherwise, error message
weighing
HOLD mode. Otherwise, error message
will flash.
TOTAL in scale, press
2ND button on scale or
mode.
on remote controller.
TOTAL
TOTAL
will flash.
F2 on remote controller.
on remote controller twice.
will keep flashing.
will flash before the
accumulator.
is successfully calculated and saved.
will keep flashing.
will flash.
STA/STR/STC
TOTAL once.