Technical Data - SilverCrest SURF 600 A1 Mode D'emploi Et Consignes De Sécurité

Technical data

Input voltage / frequency
Power consumption
Audio output power
Back-up battery
FM frequency
Station memory positions
Dimensions
Weight
Operating temperature
Protection class
Operating humidity
Permissible storage conditions
* The display brightness settings in the delivery state (lowest level) satisfy the eco-design requirement.
All other brightness settings increase power consumption.
The specifications and design are subject to change without notice.
This information describes only the technical possibilities of the device. Some countries
may have different legal regulations regarding the frequency range that is allowed to be
received. Please note that reception outside of these regulations is therefore illegal and
may be a punishable offence.
The specifications and design are subject to change without notice.
230 V / 50 Hz
~
Standby in delivery state : < 1 W *
Operation:
0.6 W
CR2032 lithium battery 3 V (not included in the package
contents)
87.5 - 108 MHz
20 FM
190 x 105 x 140 mm (W x H x D)
approx. 710 g
5 °C to 35 °C
II
max. 85 % relative humidity
0°C to 40°C, max. 85% rel.humidity
SilverCrest SURF 600 A1
max. 3 W
English - 27