Festo ELGA-BS-KF Notice D'utilisation page 27

ELGA-BS-KF
• Position the rated load in such a way that the break-down
torque resulting from force F (parallel to the axis of motion) and
lever arm a remains as low as possible (è Fig. 8).
• Avoid collisions of the mounting part and payload with other
mounting parts (è Fig. 9).
For attachment components with their own guide:
• Adjust the guide and axis so that they are exactly parallel, or use a connection that permits toler­
ance compensation. In this way, you will avoid overloading the guide.
Attachment
• Fasten the attachment to the slide with screws and centring
sleeves. Observe maximum screw-in depth D and tightening
torque (è Tab. 2).
Size
Screw
Max. screw-in depth D
Tightening torque
Centring H7
Tab. 2
Festo – ELGA-BS-KF – 1508NH English
70
M5 M6
[mm] 7.5
[Nm] 6 10
@ 5 @ 9
[mm]
a
Fig. 8
Fig. 9
Fig. 10
80 120
M5 M6 M5 M6
9.5 12.5
6 10 6 10
@ 9
F
150
M6 M8
14
10 24
27