Napoleon GL22N Instructions D'installation Et D'opération page 12

12
4.4.2 GL28
EN
Place log (#1) onto the two pins
and ensure the log is pushed flush
against the burner support, to the
rear of the unit, as shown.
#4
Place log (#4) onto the pin.
4.4.3 GL32
Place the rear log (#1) onto the
2 pins on the grate as shown.
Place log (#4) onto the pin.
Place log (#7) onto the pin as shown.
W415-1101 / D / 08.28.18
#1
Place log (#2) directly onto the grate
and ensure it is pulled to the front left
side of the grate.
#1
Place log (#2) onto the grate as
shown.
#4
Place log (#5) onto rear log and
let it rest on log (#2). Place a sec-
ond pin into log (#1) as shown.
#7
#2
#5
Place log(#5) as shown and allow
it rest on the top of the previously
placed logs. Place one pin onto the
right side of the largest log as shown.
#2
PIN
#5
Place log (#3) onto the grate and
ensure it is pulled to the front
right side. Ensure the two logs are
centered onto the grate. Insert one
pin into the hole of the back log as
PIN
Place log (#6) onto the pin.
Place log (#3) onto the grate as
shown. Place one pin into centre
of log (#1).
#6
Place log (#6) onto the pin as
shown. Place the remaining pin
into log (#1) as shown.
PIN
#3
#6
PIN
#3