DeWalt DW088 Traduction De La Notice D'instructions Originale page 56

EnGLIsH
• Measure the difference between the markings (
• Measure the difference between the markings (
• If the difference between the markings is 3.5 mm or less, the tool is properly calibrated.
• If the difference between the markings is more than 3.5 mm, the tool must be serviced.
Cleaning
• Remove the batteries before cleaning the tool.
• Regularly clean the housing with a soft cloth.
• When necessary, clean the lens using a soft cloth or a cotton bud soaked in alcohol. Do
not use any other cleaning agents.
Protecting the Environment
Separate collection. Products and batteries marked with this symbol must not be
disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled
reducing the demand for raw materials. Please recycle electrical products and
batteries according to local provisions. Further information is available at www.2helpU.
com.
Batteries
When disposing batteries, think of the protection of the environment. Check with your local
authorities for an environmentally safe way of battery disposal.
54
36 , 38 ).
37 , 39 ).