DeWalt DW088 Traduction De La Notice D'instructions Originale page 45

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry or
long hair can be caught in moving parts. Air vents often cover moving parts and should
also be avoided.

WARNING: Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.

WARNING! DO NOT DISASSEMBLE THE LASER. There are no user serviceable
parts inside. Disassembling the laser will void all warranties on the product.
Do not modify the product in any way. Modifying the tool may result in hazardous
laser radiation exposure.

WARNING: Fire hazard ! Avoid short-circuiting the contacts of a removed battery.
Additional Safety Instructions for Lasers
• This laser complies with class 2 according to IEC/EN 60825-1:2014. Do not replace a
laser diode with a different type. If damaged, have the laser repaired by an authorised
repair agent.
• Do not use the laser for any purpose other than projecting laser lines.
• An exposure of the eye to the beam of a class 2 laser is considered safe for a maximum of
0.25 seconds. Eyelid reflexes will normally provide adequate protection.
• Never look into the laser beam directly and intentionally.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the laser beam can cross any person at
head height.
• Do not let children come in contact with the laser.
Residual Risks
The following risks are inherent to the use of this device:
• injuries caused by staring into laser beam.
Labels on tool
The following pictographs are shown on the tool:
DeWALT Industrial Tool CO.
Towson, MD 21286 USA
For service information, call
1-800-4-DeWALT
D-65510 Idstein, Germany
www.DeWALT.com
www.DeWALT.eu
www.2helpu.com
Complies with 21 CFR 1040.10 and 1040.11 except
Made in China for deviations pursuant to Laser Notice No. 50,
dated June 24, 2007
EnGLIsH
43