DeWalt DW088 Traduction De La Notice D'instructions Originale page 53

Detector Service
Except for batteries, there are no user serviceable parts in the Digital Laser Detector.
Do not disassemble the unit. Unauth orized tampering with the laser detector will void
all warranties.
Detector Troubleshooting
The detector will not turn on.
• Press and release the power button.
• Check to see that the battery is in place and in the proper position.
• If the detector is very cold, allow it to warm up in a heated area.
• Replace the 9-volt battery. Turn the unit on.
• If the detector still does not turn on, take the detector to a D
The detector's speaker makes no sound.
• Ensure that the detector is on.
• Press the volume button. It will toggle on and off.
• Ensure that the laser is turned on and that it is emitting a laser beam.
• If the detector is still not making any sound, take it to a D
The detector does not respond to the beam from another
laser unit.
• The D WALT Digital Laser Detector has been designed to work only with the DW088/
e
DW088CG and the DW089 and certain other compatible line lasers.
The detector gives off a tone but the lcd display window
does not function.
• If the detector is very cold, allow it to warm up in a heated area.
• If the LCD display window is still not functioning, take the detector to a D
service center.
Bright light shining on detector causes continuous
"on-grade" signal.
• In the presence of very intense ambient light, the detector may give a false or erratic
indication of level.
• Reposition the detector out of the intense light or shade the sensor window
resume normal operation.
EnGLIsH
WALT service center.
e
WALT service center.
e
WALT
e
25
to
51