Basic Operations - JVC KD-LX30R Manuel D'instructions

1
1
2
Notes:
* If a CD is not in the loading slot, you cannot select CD as the source to play.
** Without connecting the CD changer and/or the DAB tuner, you cannot select it as the source
to play.
3
Adjust the volume.
4
Adjust the sound as you want (see pages 24 – 28).
To drop the volume in a moment
Press SOURCE (ATT) for more than 1 second while listening to any source. "ATT" starts
flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button for more than 1 second again.
To turn off the power
Press and hold OFF/ 0 until "SEE YOU" appears on the display.

BASIC OPERATIONS

3
Turn on the power.
The display illuminates and the control panel comes out.
Select the source.
Each time you press the button, the source changes as follows:
= FM = DAB tuner** = CD* = CD changer**
= External component = AM = (back to the beginning)
To operate the tuner (FM or AM), see pages 6 – 18.
To operate the CD player, see pages 19 – 23.
To operate the CD changer, see pages 44 – 47.
To operate the external component connected to the LINE IN plugs,
see page 48.
To operate the DAB tuner, see pages 49 – 54.
Note:
When you use this unit for the
first time, set the built-in clock
correctly, see page 29.
2
Volume level meter
5