Storing Your Own Sound Adjustments - JVC KD-LX30R Manuel D'instructions

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 26) to your preference and
store your own adjustments in memory.
4
1
2
3
4
5
6
Repeat the same procedure to adjust other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 26.
28
2,5 1
3
Light "MODE" on the lower part of the display.
The number buttons can work as different function buttons.
REMEMBER you must finish the following steps while "MODE"
is still on the display. Otherwise, the setting will be canceled.
Select the sound mode you want.
For details, see page 26.
Select the item you want to adjust (BAS, TRE, or
II
BBE ).
Adjust the selected item.
Press and hold SCM until the sound mode you have
selected flashes on the display.
Your adjustment made for the selected sound mode is stored in memory.