Assigning Names To The Sources - JVC KD-LX30R Manuel D'instructions

Assigning names to the sources

You can assign names to CDs and the external component connected to the LINE IN plugs.
After assigning a name, it will appear on the display when you select the source.
CD* and CD changer*
External component
4
1
Select a source you want to assign a name to.
2
When you select the CD
as the source:
When you select the
external component
connected to LINE IN as the
source:
36
Sources Maximum number of the characters
up to 32 characters (up to 40 discs)
up to 12 characters
2,7
Press and hold SEL (Select) for more than 2
seconds while pressing DISP.
* You cannot assign a name to a CD Text.
2,3
5