Basic Operations; Turn On The Power; Select The Source To Play - JVC RX-D202B Manuel D'instructions

Basic operations

1
Source lamps
1 2
4 5
7 8
10 0
1

Turn on the power

Press STANDBY/ON (or STANDBY/ON
AUDIO on the remote control).
The standby lamp goes off and the source lamp of the current
source lights in red.
Current source name appears.
ANALOG
AUTO SURR
L R
S.WFR
To turn off the power (into standby)
Press STANDBY/ON (or STANDBY/ON
remote control) again.
The standby lamp lights in red.
NOTE
A small amount of power is consumed in standby mode. To turn
the power off completely, unplug the AC power cord.
12
3
2
1
3
6
9
10
2
3
TUNED STEREO AUTO MUTING
MHz
AUDIO on the
2

Select the source to play

On the front panel:
Turn SOURCE SELECTOR until the source name
you want appears on the display.
The source lamp corresponding to the selected source lights in
red.
• As you turn SOURCE SELECTOR, the source changes as
follows:
ANALOG
AUTO SURR TUNED STEREO AUTO MUTING
L R
S.WFR
DVR/DVD (DGTL)
VCR (DIGITAL)
DBS (DIGITAL)
TV (DIGITAL)
USB DIGITAL
FM
(Back to the beginning)
*
DVR/DVD (DGTL) : Select the DVD recorder or DVD player.
*
VCR (DIGITAL) : Select the VCR.
*
DBS (DIGITAL) : Select the DBS tuner.
TV (DIGITAL) * : Select the TV.
USB DIGITAL: Select the PC component.
FM: Select an FM broadcast.
AM: Select an AM broadcast.
From the remote control:
Press one of the source selecting buttons.
• For the tuner, press FM/AM. Each time you press FM/AM, the
band alternates between FM and AM.
* Selecting the analog or digital input mode
For a component you have connected using both the analog
connection and the digital connection methods (see pages 7 to 10),
you need to select the correct input mode.
• You can select the digital input only for sources which you have
selected digital input terminals for. (See "Setting the digital input
(DIGITAL IN) terminals—DIGITAL IN 1/2" on page 20.)
• "DGTL AUTO" and "ANALOG" setting are memorized for each
source.
From the remote control ONLY:
Press ANALOG/DIGITAL to select the analog or
digital input mode.
• Each time you press the button, the input mode changes as
follows:
AUTO SURR
DIGITAL AUTO L C R
S.WFR LFE
DIGITAL
LS RS
DGTL AUTO DOLBY DIGITAL
DTS ANALOG
MHz
AM
(Back to the beginning)