Using The Surround/Dsp Modes - JVC RX-D202B Manuel D'instructions

Using the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below.
• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the
surround channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and two (stereo)
surround signals.
• For EX/ES/PLIIx setting, see page 18.
Incoming Signal Type
Dolby Digital Surround EX
Dolby Digital (3/2, 2/2)
Dolby Digital (3/1, 2/1, 3/0, 1/0)
Dolby Digital (Dual Mono)
1
DTS-ES Discrete*
1
DTS-ES Matrix*
DTS (3/2, 2/2)* 1
DTS (3/1, 2/1, 3/0, 1/0)
DTS (Dual Mono)
Analog/LINEAR PCM
Dolby Digital (2/0)
1
* DTS 96/24 processing is not applied when the EX/ES/PLIIx setting is activated. If you want to apply the processing, set the EX/ES/
PLIIx setting to "OFF" (see page 18).
2
* When "S BACK OUT" is set to "
DTS+ EX.
3
* When "S BACK SPK" is set to "
the display.
4
* When "S BACK SPK" is set to "
NOTE
For some Dolby Digital Surround EX software, Dolby Digital 5.1-channel reproduction ("DOLBY DIGITAL") is applied.
About the DSP modes
• The following DSP modes are available regardless of incoming signal type.
HALL1, HALL2, LIVE CLUB, DANCE CLUB, PAVILION, THEATER1, THEATER2
• If an incoming signal is a multi-channel (more than 2 channel) digital signal, "MONO FILM" is not available.
• If "SURROUND SPK" is set to "
Virtual Surround Back
This function creates the great surround effect from the behind as if you have connected the surround back speaker. The VIRTUAL
SB (Surround Back) indicator lights up on the display.
If you have connected (and activated) the surround speakers, you can use Virtual Surround Back without connecting the surround
back speaker.
Virtual Surround Back is activated when EX/ES/PLIIx is set to other than "
following signals:
-Dolby Digital Surround EX
-DTS-ES
-Dolby Digital or DTS with more than 4-channels
30
AUTO ON
3
DOLBY D EX* DOLBY D EX*
DOLBY DIGITAL DOLBY D EX*
3
DTS-ES DSCRT* DTS-ES DSCRT*
3
DTS-ES MATRIX* DTS-ES MATRIX*
DTS SURROUND DTS+NEO:6*
PLIIx MOVIE*
< >
1SPK ," D+PLIIx MOVIE is changed to DOLBY D EX and DTS+PLIIx MOVIE is changed to
< >
NO ," Virtual Surround Back is activated for the modes and the VIRTUAL SB indicator lights up on
< >
NO ," PLllx MOVIE is changed to PLll MOVIE and PLllx MUSIC is chenged to PLll MUSIC.
< >
NO ," "ALL CH STEREO" is not available.
EX/ES/PLIIx setting
PLIIx MOVIE PLIIx MUSIC
3 2,3
D+PLIIx MOVIE* D+PLIIx MUSIC*
3 2,3
D+PLIIx MOVIE* D+PLIIx MUSIC*
DOLBY DIGITAL
DUAL MONO
3 2,3
DTS+PLIIx MOVIE* DTS+PLIIx MUSIC*
3 2,3
DTS+PLIIx MOVIE* DTS+PLIIx MUSIC*
3 2,3
DTS+PLIIx MOVIE* DTS+PLIIx MUSIC*
DTS
DUAL MONO
4 4
/PLIIx MUSIC* /NEO:6 CINEMA/NEO:6 MUSIC
< >
OFF " and when playing back the software including the
OFF
3
DOLBY DIGITAL
3
DOLBY DIGITAL
3
DTS SURROUND
3
DTS SURROUND
3
DTS SURROUND