Schellenberg Smart DRIVE 10 Mode D'emploi page 145

Sl. 7
Sl. 8
1. Sestavite tirnice (sl. 4).
2. Drugo povezovalno tirnico potisnite prek konca srednje tirnice (sl. 5).
3. Odstranite kabelsko vezico.
4. Vijačni drog A povlecite z verigo do konca najvišje tirnice (sl. 6).
5. Povežite z zatiči in vzmetmi ter zaprite z matico (sl. 7).
6. Sornike zategnite v pravilen položaj (sl. 8) in kabelske vezice odrežite v bližini zobnika. Tirnica je zdaj montirana.
Chain tension:
The chain tension is measured by the length of the spring, our recommended
spring length after tightened need to be 17.5-19.5mm (see the pictures as
Sl. 9
follows).
17,5-19,5 mm
145
Chain tension:
The chain tension is measured by the length of the spring, our recommended
spring length after tightened need to be 17.5-19.5mm (see the pictures as
follows).
SI