Media Playback Via Usb Input - Kimex 164-5070 Manuel D'utilisation

image: jpg, jpeg, png, bmp
2.3. TEMPLATE
This screen displays the predefined templates and the
user fills them and prepares them for use. User-cre-
ated templates are kept in the My Templates folder.
They can be played, edited and deleted from here.
2.3.1. Creation of the Templates
Scroll to one of the previously defined templates
and press OK. When the OK button is pressed on
the zones, the compatible contents in the memory
are listed. Single or multiple selections can be made
here. The template can be previewed with the Pre-
view button on the right and the Save button can be
selected and saved.
2.3.1.1. Add Content to Templates Input Fields
Template Time: The length of time that the template
will be displayed in a program cycle.
Content Time: Specifies the amount of time a content
will be displayed in the selected area via the template.
Aspect Ratio: If the area on the template accepts
the image, it determines whether the inserted image
performs one of the behaviors that maintain the aspect
ratio or fill the area.
Audio: If there is a field that accepts video in the temp-
late, it determines whether the video will sound or not.
2.4. Export/Import
Using this menu, the Display settings can be trans-
ferred to another Display.
2.5. Switch to Vsign
With this menu, the users can be transferred to VSign
Application. In addition, the VSign application will start
to open when the Display is turned on.
2.6. Switch to Vsign Lite Portrait Orientation
The user can rotate the screen 90 degrees clockwise
or counterclockwise by selecting Portrait 1 or Portrait
2 from Menu > Settings > Signage > Controls > OSD
Orientaton. The application will be rotated vertically.

Media Playback via USB Input

You can connect 2.5" and 3.5" inch (HDD with
external power supply) external hard disk drives or
USB memory stick to your Display by using the USB
input/s of the Display.
IMPORTANT! Back up the files on your storage
devices before connecting them to the Display.
Manufacturer will not be responsible for any file
damage or data loss. Certain types of USB devices
(e.g. MP3 Players) or USB hard disk drives/memory
sticks may not be compatible with this Display. The
Display supports FAT32 and NTFS disk formatting.
Wait a little while before each plugging and unplugging
as the player may still be reading files. Failure to do
so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
while playing a file.
You can use USB hubs with your Display's USB
input/s. External power supplied USB hubs are
recommended in such a case.
It is recommended to use the Display's USB input/s
directly, if you are going to connect a USB hard disk.
Note: When viewing image files the Media Browser menu
can only display 1000 image files stored on the connected
USB device.
Media Browser Menu
You can play back music and movie files and display
photo files stored on a USB storage device by
connecting it to your Display. Connect a USB storage
device to one of the USB inputs located on the rear
side of the Display.
After connecting a USB storage device to your Display
Media Browser menu will be displayed on the screen.
You can access the content of the connected USB
device any time later from the Sources menu. Select
the related USB input option from this menu and press
OK. Then select the file of your choice and press OK
to display or play it back.
You can set your Media Browser preferences by
using the Settings menu. Settings menu can be
accessed via the information bar which is displayed on
the bottom of the screen when pressed the Info button
while playing back a video file or displaying a picture
file. Press the Info button, highlight the gear wheel
symbol positioned on the right side of the information
bar and press OK. Picture Settings, Sound Settings,
Media Browser Settings and Options menus will be
available. The contents of these menus may change
according to the type of the currently open media file.
Only Sound Settings menu will be available while
playing back audio files.
Start playback and activate
Start playback and activate
Start playback and activate
Start playback and activate
,
To use the functions on the information bar highlight
the symbol of the function and press OK. To change
the status of a function highlight the symbol of the
function and press OK as much as needed. If the
symbol is marked with a red cross, that means it is
deactivated.
English - 12 -
Loop/Shuffle Mode Operation
All files in the list will be contin-
uously played in original order
The same file will be played
continuously (repeat)
All files in the list will be played
once in random order
All files in the list will be con-
tinuously played in the same
random order.