Kimex 164-5070 Manuel D'utilisation page 101

Headphone
Audio Link (Optional)
AVL (Automatic
Volume Limiting)
Headphone/Lineout
Dynamic Bass
Dolby Audio
Surround Sound
Digital Out
Network Menu Content
Network Type
Scan Wireless
Networks
Press WPS on your
wifi router
Internet Speed Test
Advanced Settings
Networked Standby
Mode
Note: For detailed information on the options of this menu refer to the Connectivity section.
Signage Menu Content
Device Info
Set ID
Software
upgrade
Serial number
Sets headphone volume.
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing. Only available if Headphone/Lineout
option is set to Headphone.
Press OK to open the Audio Link menu screen. Using this screen you can discover
and connect the sound devices to your Display wirelessly.
Sets the sound to obtain fixed output level between sources.
If the Dolby Audio menu item is set to an option other than Off the AVL setting options
will change. Auto, Night, Normal and Off options will be available. In Auto mode the
Display will switch to Normal or Night mode automatically according to the current
time information. If no time information is available this option will always function as
Normal. When the Display switches to Night mode for the first time after setting this
option as Auto, an information bar will pop up on the screen.
Please note that compared to Normal mode Night mode provides more aggressive
dynamic compression control which is suitable for silent environments.
When you connect an external amplifier to your Display using the headphone jack, you
can select this option as Lineout. If you have connected headphones to the Display,
set this option as Headphone.
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout, the output from the headphone socket will be set to maximum which
could damage your hearing. A warning message will be displayed on the screen when
switched to Lineout option. Remove your headphone and press OK to continue.
Enables or disables the Dynamic Bass.
Smart, Movie, Music, News and Off options will be available. Set as Off to disable.
Note: Some items in Sound menu will be grayed out and unavailable if set to an option other than Off.
Surround sound mode can be changed as On or Off.
Sets digital out audio type. PCM and Compressed options are available.
Disable the network connection or change the connection type.
Start a search for wireless networks. This option will be available if the Network Type
is set as Wireless Device.
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press OK. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Start a speed test to check your connection bandwidth. The result will be displayed
on the screen when finished.
Change the IP and DNS configurations of your Display.
Enable or disable this feature by setting it as On or Off.
Sets the device ID. You can select a value between 0-99 using the numeric buttons
on the remote in order to identify your Display.
Displays current software version. Press OK to see the upgrade options. You can use
these options to start a manual search for software updates and set your automatic
scan preference.
Displays serial number of the unit. (Cannot changed by user)
English - 16 -