Kimex 164-5070 Manuel D'utilisation page 102

Model name
Save model
information
Display Life Time
Controls
OSD Orientation
Pixel shift
No Signal
No Signal Delay
No Signal Power
Off
No Signal Timer
(*)
Panel Lock
RCU Inhibit
Displays model name of the unit. (Cannot changed by user)
Copies the model information data of the unit to a connected USB device.
Displays the lifetime of the unit in hours.
Sets the OSD (On Screen Display) rotation of your Display. Landscape, Portrait 1
and Portrait 2 options are available.
Enables or disables pixel shifting. This option can be used to avoid image retention
(after image effects) that can occur when displaying fixed patterns or still images for
long periods of time. If enabled, the picture and OSD (On-Screen Display) will be shifted
at specified time intervals.
Sets the behavior preference of the Display, when no signal is detected from the currently
set input source. Failover and Input Search options are available.
If Failover is selected the Display checks the connected USB device for available
files to play. If no playable files are available or there is no USB device connected to
the Display, the No Signal image will be displayed. If there isn't any No Signal Image
available, No Signal OSD will be displayed on the screen. The setting of the USB Auto
Play option in the Settings>System>More menu is not important, in Failover mode it
will function anyway.
If Input Search is selected the Display will search all available input sources consecutively
to find signal. If no signal is detected from other available sources, No Signal OSD will
be displayed and the Display will turn itself off after a period of 30 seconds (*).
(*) If the ERP Regulations 2021 are applied (depends on the model of the unit): The Display will turn
itself off after a specified period of time (defined in No Signal Timer option)
How to install No Signal Image
Install the file you want to use onto the root directory of any USB storage device and
name it as "NoSignalImage.png". Connect the USB storage device to the Display.
Highlight USB Operations option in the Settings>Signage>USB menu and press OK.
Sets a delay value to the 'No Signal' preferences when the Display is in No Signal state.
After the set delay time is expired 'No Signal' preferences will be applied. If the No Signal
option is set as Input Search, this option will not be available.
When enabled the Display will turn itself off after a period of 5 minutes (*), if no signal
is received from the selected source.
(*) If the ERP Regulations 2021 are applied (depends on the model of the unit): The Display will turn
itself off after a specified period of time (defined in No Signal Timer option)
This feature will only work if all of the following circumstances occur:
- No Signal option is set as Failover.
- USB device is not connected to the Display / USB device is connected but there are
no playable files installed on the USB device.
If the No Signal option is set as Input Search, this option will not be available.
You can define a shut-off timer for the Display using this option. When the Display is in
No Signal state and No Signal OSD is displayed on the screen, it will go into standby
mode after the time set here has expired.
(*) If the ERP Regulations 2021 are applied (depends on the model of the unit): This option will be available
Set as Off to prohibit the use of the buttons on the Display.
Set as On to inhibit the use of the remote. Remote control will function in Stand-By mode
independently from the setting of this option.
To turn this option off and be able to use the remote again, press MENU/M-1-9-7-3
buttons on the remote consecutively. Signage menu will appear. Enter the Controls
menu and set this option as Off.
English - 17 -