Settings Menu Content - Kimex 164-5070 Manuel D'utilisation

Settings Menu Content

Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Advanced Settings
Dynamic
Contrast
Noise Reduction
Colour Temp
Picture Zoom
Picture Shift
Film Mode
Skin Tone
RGB Gain
HDMI Full Range
Edge Smoother
Reset
Sound Menu Content
Volume
Equalizer
Balance
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Text, Game, Sports, Signage and Natural.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
This Display is designed to be environmentally friendly. If you set this option to Minimum,
Medium, Maximum or Auto the Display will reduce energy consumption by regulating
the backlight level accordingly. If you like to set the backlight level to a fixed value set as
Custom and adjust the Backlight (located under this setting) manually using Left or Right
buttons on the remote. Set as Off to turn this setting off.
If pressed Right button while Auto option is selected or Left button while Custom option
is selected, "Screen will be off in 15 seconds." message will be displayed on the screen.
Select Proceed and press OK to turn the screen off immediately. If you don't press any
button, the screen will be off in 15 seconds. Press any button on the remote or on the
Display to turn the screen on again.
When the Display is not in use, please switch off or disconnect the Display from the mains
plug. This will also reduce energy consumption.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. The backlight function will be inactive if the
Energy Saving is set to an option other than Custom.
You can change the dynamic contrast ratio to desired value.
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Sets the desired colour temperature value. Cool (1300K), Normal (9300K) and Warm
(8500K) options are available.
Sets the desired image size format.
This option may be available depending on the Picture Zoom setting. Highlight and press
OK, then use directional buttons to shift the picture upwards or downwards.
Films are recorded at a different number of frames per second. Turn this feature on when you are
watching films to see the fast motion scenes clearly.
Skin tone can be changed between -5 and 5.
Adjust the strength of the red, green and blue colours. You can use this feature for fine
adjustment of white balance in the picture.
While watching from a HDMI source, this feature will be visible. You can use this feature to
enhance blackness in the picture.
Configures the High-Frequency Enhancer function preference. Off, Low, Med, and High
options are available (Off - clear image, High - blur image).
Resets the picture settings to factory default settings (except Game mode).
Adjusts the volume level.
Selects the equalizer mode. Custom settings can be made only when in User mode.
Adjusts whether the sound comes from the left or right speaker.
English - 15 -