BFT MIZAR 6 Instructions D'utilisation Et D'installation page 9

INSTALLATION MANUAL
ENGLISH
automatically (adjustable from 0 to 90 sec.).
TW
It is used to set the motor working time, after which the motor stop (adjustable
from 0 to 90 sec.). When using electrical limit switches, increase the motor
stopping time by a few seconds with respect to the leaf closing time.
9) ACCESSORIES
SPL (fig.4).
Pre-heating optional board. Recommended for temperatures below -10°C.
ME (fig.5).
Optional board used to connect a 12Vac electric lock.
SS (fig.6).
Optional board signalling gate open. Operates only with electrical limit
switches.
EBP (fig.2).
The EBP electric lock with continuous service can be connected directly to
terminals 1 and 4.
10) MAINTENANCE AND DEMOLITION
The maintenance of the system should only be carried out by qualified
personnel regularly. The materials making up the set and its packing must
be disposed of according to the regulations in force. Batteries must be
properly disposed of.
The descriptions and illustrations contained in the present manual
are not binding. The Company reserves the right to make any alterations
deemed appropriate for the technical, manufacturing and commercial
improvement of the product, while leaving the essential product
features unchanged, at any time and without undertaking to update
the present publication.
9
MIZAR 6 - Ver. 03 -