Using The Device - InnoCigs Aspire Breeze 2 Set Manuel D'utilisation

Using the Device

Operating Instructions
Please charge the battery fully before using it for the first time. Prior to first use, drip a few drops
of your e-liquid on the atomizer head and let it sit before vaping. Please take several puffs without
activating the atomizer and leave the atomizer head sit for 15 minutes in the e-liquid filled pod before
use. Don't clean atomizer heads with water. Because atomizer coils and e-liquid pods are wearing
parts, they must be changed regularly.
Note for Cleaning
Use a dry cloth or cotton swab to clean the device.
Power On/Off
Press the Fire button rapidly five times within two seconds to switch on the device. Turn the device off in
the same fashion, by pressing the Fire button quickly 5 times. When its current charge capacity is above
3.8 volts the indicator lights will be blue and orange. When the charge is between 3.8 and 3.5 volts
the light will be blue only. When the charge drops below 3.5 volts the light will then become orange to
remind you that it is time to charge your Breeze 2. We recommend that you switch off the device during
transport and during long periods of non-use.
40