ETNA T267 Notice D'utilisation page 70

Special warnings and Special warnings and
fault reports fault reports
70
To deactivate the timer before the set time has elapsed:
• Select the desired timer display (see section Changing the
timer setting) – the set time and the corresponding dot that
indicates the cooking fi eld will fl ash.
• Press the "–" (I) sensor key to set the value to "00", or press
the "+" (G) and "–" (I) sensor key simultaneously, to reset the
value to zero immediately.
• If all power levels are set to "00", the cooking hob will be
turned off automatically after 10 seconds.
• If any of the keys is activated for more than 10 seconds, the
cooking hob will be turned off, an alarm will sound, and the
symbol "F" will fl ash on the display.
• If several keys are covered by an object or if boiled-over liquid
is spilt over the surface of the sensor keys, the cooking hob
will automatically go off after a certain period of time.
• If the keys do not respond, disconnect the cooking fi eld from
the power supply network for a few minutes (remove the fuse
or trip the main switch); then, reconnect the hob to the power
mains and reengage the main switch.