ETNA T267 Notice D'utilisation page 68

Power level
Maximum operation time in
hours
Temporary cooking Temporary cooking
progress suspension progress suspension
- STOP & GO - STOP & GO
(depending on the (depending on the
model) model)
Program timer Program timer
(depending on the (depending on the
model) model)
68
u 1 2
6 6 6
The STOP & GO function enables you to temporarily suspend, or
pause the cooking progress (urgent other tasks), while keeping
all the settings.
Engaging the STOP & GO function
• Cooing is temporarily suspended by touching the STOP & GO (C)
sensor key.
• A signal light (C1) will light up above the sensor key.
• All settings are frozen, and the cooking zones do not operate. The
letters S, t, O, and P are indicated alternately on the display.
Resuming the cooking progress
• The cooking hob will continue to operate when the STOP & GO
(C) sensor key is pressed again.
• Signal light (C1) goes off.
If the STOP & GO function is not deactivated in 10
minutes, the entire cooking hob will be witched off
automatically.
The cooking hob features two types of timer functions:
A alarm function – countdown without the switch-off option
B switch-off function – countdown with the switch-off option for
respective cooking zones.
A Warning function- countdown without switching off the
cooking zone
The timer warns you that the time set has elapsed, but does not
turn off the cooking zone. The alarm timer can be set when the
cooking hob is on.
• Press the timer sensor key (D) to activate the timer. "00" is
displayed on the timer display (L) and the decimal point (F1) is
lit.
• Press the "+" (G) and "–" (I) sensor keys to set the time in the
range from 1 to 99 minutes.
• After the set time has elapsed, an alarm will sound, but the
cooking zone will not be turned off.
• Acknowledge and turn off the alarm by pressing any sensor
key; if this is not done, the alarm will stop after a certain period
of time.
• Alarm will remain active also after the hob is switched off with
button (A).
3 4 5 6
5 5 4 1,5
7 8 9
1,5 1,5 1,5