Technical Description; Shaft Ladder System; Type Testing; Scope Of Delivery - zarges 47321 Notice De Montage Et D'utilisation

3. Technical description

3.1 Shaft ladder system

The shaft ladder system is designed according to the modular principle. Any desired
access height can be reached by combining matched elements.
The following materials are available: hot-dip galvanised steel (ST
(ST

3.2 Type testing

The shaft ladder systems described below are type-tested and registered.
The shaft ladders meet the requirements of EN 14396:2004-04. Declarations of
performance are available on the ZARGES home page.

3.3 Scope of delivery

The scope of delivery is customer-specific and depends on the individual order.
• Before starting assembly of the product, check that all components listed in the

3.4 Identification

• Type plates
• Product decals
), glass-fibre reinforced plastic (GRP).
V4A
order confirmation and on the delivery note have been supplied and are in perfect
condition. Use only original parts in perfect condition to assemble the product.
> For identification of the specific model supplied, see the type plate. Type plates are
attached to the components of the shaft ladder system. The illustration shows the
type plate on a shaft ladder, hot-dip galvanised steel.
> All product decals must remain attached to the product.
), stainless steel
Zn
7