Installation Check List - Manitowoc Rf Serie Manuel D'utilisation

Installation Instructions

Installation Check List

All Manitowoc ice machines are factory-operated and adjusted before shipment. Adjustments and maintenance procedures
outlined in this manual are the responsibility of the owner/operator and are not covered by the warranty.

Is the ice machine level?

Is the ice machine and adapter (when used) secured to
the dispenser?

Have all of the electrical and water connections been
made?

Has the supply voltage been tested and checked
against the rating on the nameplate?

Is there proper clearance around the ice machine for air
circulation?

Is the ice machine grounded and polarity correct?

Has the ice machine been installed where ambient
temperatures will remain in the range of 50° - 110°F
(10° - 43°C)?

Has the ice machine been installed where the incoming
water temperature will remain in the range of 37° - 90°F
(3° - 32°C)?
20

Is there a separate drain for the water-cooled
condenser?

Is there a separate drain for the dispenser?

Is the ice making water turned on?

Are all electrical leads free from contact with
refrigeration lines and moving equipment?

Has the owner/operator been instructed regarding
maintenance and the use of Manitowoc Cleaner and
Sanitizer?

Has the owner/operator completed the warranty
registration card?

Has the ice machine and bin been sanitized?

Is the rocker switch set to ON?
Part Number 000007644 Rev 01 12/16
Section 2