Dryer Safety; Installation Requirements; Tools And Parts - Maytag MDE17MN Mode D'emploi

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Do not store or use petrol or other flammable vapors in the vicinity of this or any other appliance.

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed
20 cm (8") or 25 cm (10")
I
Pipe wrench
20 cm (8") or 25 cm (10")
I
adjustable wrench
Flat-blade screwdriver
I
Phillips screwdriver
I
Adjustable wrench that
I
opens to 2.5 cm (1") or
hex-head socket wrench
Level
I
All manuals and user guides at all-guides.com

DRYER SAFETY

Your safety and the safety of others are very important.
FOR YOUR SAFETY

INSTALLATION REQUIREMENTS

8 mm ( 5 ⁄ ") socket wrench
I
16
Utility knife
I
Vent clamps
I
Caulk gun and caulk
I
(for installing new
exhaust vent)
Pliers
I
Putty knife
I
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Parts supplied
Remove parts bag from dryer drum. Check that all parts were
included.
Foot boot (4)
I
Dryer foot (4)
I
3