Causes Of Damage - Siemens ET13051 Notice D'utilisation

or switch off the fuse in the fuse box.
Contact the after-sales service.
Do not use any high-pressure cleaners or
Risk of electric shock!
■
steam cleaners, which can result in an
electric shock.
A defective appliance may cause electric
Risk of electric shock!
■
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in
the fuse box. Contact the after-sales
service.
Cracks or fractures in the glass ceramic
Risk of electric shock!
■
may cause electric shocks. Switch off the
circuit breaker in the fuse box. Contact the
after-sales service.
Damage Cause
Stains Food spills
Unsuitable cleaning agents
Scratches Salt, sugar and sand
Rough pot and pan bases scratch the
ceramic.
Discolouration Unsuitable cleaning agents
Pan abrasion (e.g. aluminium)
Blisters Sugar, food with a high sugar content Remove spills immediately with a glass scraper.
4
Risk of injury!
Saucepans may suddenly jump due to
liquid between the pan base and the
hotplate. Always keep the hotplate and
saucepan bases dry.

Causes of damage

Caution!
Rough pot and pan bases scratch the ceramic.
■
Avoid boiling pots dry. This may cause damage.
■
Never place hot pots or pans on the control panel, the
■
display area or the surround. This may cause damage.
Damage can occur if hard or pointed objects fall on the hob.
■
Aluminium foil and plastic containers melt on hot hotplates.
■
Oven protective foil is not suitable for your hob.
Overview
The following table provides an overview of the most frequent
kinds of damage:
Action
Remove spills immediately with a glass scraper.
Only use cleaning agents which are suitable for ceramic
Do not use the hob as a work surface or storage space.
Check your cookware.
Only use cleaning agents which are suitable for ceramic
Lift the pots and pans when moving them.