Medion S89038 Mode D'emploi page 383

NOTICE!
If you have activated the automatic switch-
off function (AUTO-OFF), the loop re-
cordings will automatically switch off
when the battery is empty. When the cam-
era is switched on again, you will need to
restart recording.
Sensor flip
To edit the Sensor Flip option, please proceed as de-
scribed in "13.1.4. Sensor Flip" on page 374.
G sensor (G trigger)
Your camera has an integrated G sensor. This sensor
registers heavy braking and impacts, and starts a re-
cording fully automatically.
The sequences captured in this way are stored.
 Press the QP1QHH button repeatedly until the
SET (settings) option is displayed.
 Press the shutter release button to enter the set-
tings menu.
 Highlight the CAM MENU and confirm your se-
lection by pressing the shutter release button.
 Highlight the G TRIGGER option and confirm
your selection by pressing the shutter release but-
ton.
382 of 524