Medion S89038 Mode D'emploi page 327

• Dismantling the device could lead to a
risk of high-voltage electric shock. Tests
on internal components, modifications
and repairs should be carried out by
specialists only. Take the device to an
authorised Service Centre for testing.
• If you are not going to use the camera
for some time, remove the battery to
prevent leakage.
• Do not expose the camera to either
drips or spray, unless it is enclosed in
the waterproof casing. Do not place
any objects filled with liquids (e.g. vas-
es) near to or on the device.
• Avoiding electric shock
• Never open the device housing except
to insert the battery.
• In the event of a fault or malfunction,
switch off the camcorder immediately.
• Liquids may impair the electrical safety
of the device.
326 of 524