10.1. Recording videos
Proceed as follows in order to record films:
Switch on the camcorder by pressing and holding
down the QP1QHH button. After about 3 seconds,
the camcorder and display switch on.
Select the desired subject.
Press the shutter release button.
The elapsed time (hours:minutes:seconds) is shown on
the OLED display during recording.
Press the shutter release button again to stop re-
cording.
The video is automatically stored on the memory card.
NOTICE!
If the recordings are to be made in Auto
mode, please set this before use. See
"13.1.5. Auto mode (car DV)" on page 375
for more information.
356 of 524