GE RAK180W1 Manuel Du Propriétaire Et Instructions D'installation page 18

Thermostat Configuration
Testing the thermostat
Following the thermostat configuration, test if the thermostat
is controlling the Zoneline unit.
• Press the "Power" button to turn the thermostat ON;
• Press the "Down" button to change the temperature set
point below the current room temperature to confirm that
the thermostat initiates air conditioning.
• Press the "Up" button to change the temperature set point
above the current room temperature to confirm that the
thermostat initiates heating.
• Change the fan speed by touching the "Fan" button to test if
the thermostat is controlling the fan speed.
18
49-5000416 Rev. 1