Thermostat Configuration - Ge Rak180W1 Manuel Du Propriétaire Et Instructions D'installation

Thermostat Configuration

Once the thermostat is powered, thermostat configuration
settings will appear on the thermostat screen.
In order to properly operate the HVAC unit:
• Set the thermostat clock
• Enter the room number
• Configure the equipment settings
• Select Energy Savings Preset (Zoneline custom settings
are the default).
The thermostat configuration screens have a 30-second
time-out. If no action is taken within thirty (30) seconds, the
thermostat will exit configuration settings.
NOTE: You can
access Thermostat
Configuration settings at
any time by pressing the
"Configuration" button.
NOTE: If the thermostat is connected to a network, the
settings configured online will be applied.
49-5000416 Rev. 1
11